FD67 Profibus-DP Manual
9
4.2 Assembling the hood of the bus node
Before assembling the hood, it is advisable to set the Profibus address, because the
switches are no more accessible when the hood is attached. It is also recommended
to note the set Profibus address on a label plate.
)
*
%
$
+
♦
Fig. 4-1 : Assembling the hood of the bus node
$
Fastening screws
)
Profibus address switches
%
Hood
*
Base module
+
Functional ground connection
&
Wire the functional ground connection of the hood.
'
Mount the hood
on the base module.
(
Screw the hood
%
onto the base module
*
. The screws are integrated into the hood
$
. Make sure
that the screws are equally tightened.
The hood must be screwed onto the base module and all the connectors must be
fitted with cables or blind caps in compliance with type IP 67 specifications.