9
3. While another person lifts the rear of the Frame
(1), attach the Rear Stabilizer (16) to the Frame
with two M10 x 96mm Bolts (65) and two M10
Locknuts (91).
91
91
16
65
1
3
4
4.
Tip: Loosen the four M6 x 38mm Screws (25)
if the Backrest Tubes (52) do not slide into
the Seat Carriage (41).
Insert the Backrest Tubes (52) into the Seat
Carriage (41).
Attach each Backrest Tube (52) with an M8
x 35mm Bolt (72), an M8 Split Washer (93),
and an M8 Locknut (90).
Make sure that the
Locknuts are in the hexagonal holes in the
Seat Carriage (41). Do not tighten the Bolts
yet.
72
52
52
25
25
41
93
93
90
90
Summary of Contents for COMMERCIAL VR
Page 4: ...4 ...
