10
5.
Tip: Avoid damaging the wires inside the
Seat Handlebar (11) during this step.
Attach the Seat Handlebar (11) to the Seat
Carriage (41) with two M8 x 68mm Bolts (70),
two M8 Curved Washers (86), and two M8
Locknuts (90).
Make sure that the Locknuts
are in the hexagonal holes in the Seat
Carriage.
Then, plug the pulse wire (A) into the receptacle
in the Right Shield (14).
See step 4. Tighten the two M8 x 35mm
Bolts (72).
5
11
70
86
41
90
A
14
90
6. Attach the Book Holder (3) to the Backrest Tubes
(52) with two M4 x 19mm Tek Screws (75).
Then, attach the Book Holder (3) to the Backrest
(8) with two M4 x 38mm Screws (89).
89
75
8
3
52
6
Summary of Contents for COMMERCIAL VR
Page 4: ...4 ...
