11
7. Attach the Seat (9) to the Seat Carriage (41)
with four M6 x 16mm Screws (71) and four
M6 Washers (88) (only two Screws and two
Washers are shown).
7
41
9
71
88
88
8. Have another person hold the Upright (2) near
the Frame (1).
See the inset drawing.
Locate the wire tie in
the Upright (2). Tie the lower end of the wire tie
to the Main Wire (43) and to the Pulse Wire (42).
Next, pull the upper end of the wire tie upward
out of the top of the Upright.
Tip: To prevent the wires from falling into the
Upright (2), secure the wires with the wire tie
.
Slide the Upright (2) onto the Frame (1).
Tip: Avoid pinching the wires.
Attach the
Upright (2) to the Frame (1) with four M8 x 18mm
Screws (67) and four M8 Split Washers (93).
Tip: Tighten the two Screws in the front of
the Upright and then tighten the other two
Screws.
8
2
67
67
67
1
93
93
93
93
43
42
Avoid pinching
the wires
42
43
Wire
Tie
Summary of Contents for COMMERCIAL VR
Page 4: ...4 ...
