13
11. Untie and discard the wire tie on the Main Wire
(43) and the Pulse Wire (42).
While another person holds the Console (4) near
the Upright (2), connect the wires on the Console
to the Main Wire (43) and to the Pulse Wire (42).
Insert the excess wire into the Upright (2) or into
the Console (4).
Tip: Start all screws before tightening any of
them. Also, avoid pinching the wires during
this step.
Attach the Console (4) to the Upright
(2) with four M4 x 16mm Screws (77).
11
42
4
77
2
43
2
77
53
12
12. Orient the Front Handlebar Cover (53) as shown.
Attach the Front Handlebar Cover (53) to the
Upright (2) with two M4 x 16mm Screws (77).
Avoid pinching
the wires
Summary of Contents for COMMERCIAL VR
Page 4: ...4 ...
