manualshive.com logo in svg

NordicTrack COMMERCIAL VR, User Manual

Share
Download
NordicTrack COMMERCIAL VR User Manual Download Page 14

14

13. Identify the Right Pedal (21). 

 

Using an adjustable wrench, 

firmly tighten

 the 

Right Pedal (21) 

clockwise

 into the Right Crank 

Arm (23). Tighten the Left Pedal (not shown) 

counterclockwise

 into the Left Crank Arm (not 

shown). 

 

Adjust the strap on the Right Pedal (21) to the 
desired position, and then press the end of the 
strap onto the tab on the Right Pedal. 

Adjust 

the strap on the Left Pedal (not shown) in the 
same way.

 

13

14

21

51

Tab

Strap

23

14. Plug the Power Adapter (51) into the receptacle 

on the frame of the exercise bike.

 

To plug the Power Adapter (51) into an outlet, 
see HOW TO PLUG IN THE POWER ADAPTER 
on page 16.

15. 

After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it 
functions properly. Make sure that all parts are properly tightened before you use the exercise bike.

 

Note: After assembly is completed, extra parts may be left over. Place a mat beneath the exercise bike to 
protect the floor.

Summary of Contents for COMMERCIAL VR

































Reviews:

No comments

Brands by name

Popular brands

Load more brands