CHAPTER FIVE - CONECTIVITY
89
To get your PL3000
synchronized with base station:
1.
Tap on the ‘Security’ tab to
open the Security page.
2.
Enter the PIN code of your
SIM card in the ‘PIN code’ field.
3.
Tap on the ‘Apply’ button;
wait until the Security page informs
you that the SIM is unlocked.
4.
Check the ‘Enter PIN
automatically’ checkbox.
The PIN code is now inserted
into the GPRS modem, and your
PL3000 is synchronizing with a cell
of your service provider’s cellular
network. The checked ‘Enter PIN automatically’ checkbox makes it possible next
time as you power up your PL3000 that you need not return to this ‘Security’ page
for PIN code insertion but PL3000 inserts the saved PIN code for you. However,
these two settings are not yet stored permanently. If you want to do it now, close
the NID WWAN applet and see the section ‘Making Your Configuration Settings
Permanent’ on page 97. After that you can return to the NID WWAN applet and
check if your PL3000 has synchronized with your service provider’s cellular
network.
5.
If the Connection page is not in view
on the screen, tap on the ‘Connection’ tab to
see whether or not your PL3000 is
synchronized with your operator’s network.
When your PL3000 has found your
service provider’s network, on the Connection
page:
9
The
‘Network:’
field displays the
name of the network that your PL3000
has synchronized with.
9
The
‘Status:’
field tells you the state
of the GPRS modem’s access to the cell.
9
The
‘Service:’
field displays the
fastest service available either in your
current coverage area or supported by
the GPRS modem on your PL3000.
Synchronizing
PL3000 with
Base Station
