M6 x16 screw, 1 pcs.
M6 lock washer, 1 pcs.
16
Install matchstick
holder assy. and
igniter battery
Install M6X16 screw and M6 lock washer
at the 2/3 position of back left leg of cart.
Do not tighten screw. Hang the single loop
end of matchstick holder (part 22) onto the
screw. You may also hang the top loop on
the other end of the matchstick holder over
the same screw (see illustration below).
This is a safety feature for use when
lighting with a standard match. Please use
with caution.
Locate igniter button on front panel of
grill. Unscrew the igniter button. Place
AA battery inside the igniter negative
end first. Make sure the spring is located
inside the rubber boot of the igniter button.
Screw igniter button back into place (see
illustration).
Note: AA battery is not provided by
manufacturer.
Assembly
17
