12
C
8
Install the knob
bezel and side
burner gas line
As shown in figure below, line up the
holes on the side burner valve bracket
(pre-assembled) to the holes on the
back side of the right side table’s front
panel. Hold in place with one hand. On
the front side of the side table’s front
panel, line up the holes of the bezel
(part 12) with the holes on the front
panel. Hold the bezel with thumb and
the side burner valve in place. Using
the other hand insert M4x8 screws into
holes in bezel securing bezel and side
burner control valve. Tighten screws.
9
Install side burner
Place side burner through the hole in the top of the right side table. Insert the open end of side
burner (part 14) to the outlet end of side burner valve (see illustration). (It is ok that the open part
of the side burner is not sealed). Line up the holes on the side burner bracket (pre-assembled) to the holes
on the top of the side table, locking the side burner at the mounting hole of right side burner with
corresponding screws-M4x8. Insert the ignition wire in the electrode of side burner. Mount the knob (part
13) on the side burner valve stem.
13
14
C
Assembly
M4 x8 screw, 2 pcs.
M4 x8 screw, 2 pcs.
13
