Connecting Gas
ALWAYS perform a gas leak test before using the grill.
Connect the gas hose to the gas
rail inlet on the left hand side of the
barbecue. Do not overtighten.
Do not use any sealing tape, paste
or liquid on the connection.
Connect the regulator to the gas
bottle according to your regulator
and bottle dealer’s instructions.
Gas hoses used for this product
must not exceed 150 cm in length
Confirm all barbecue control knobs
are in the OFF position.
We recommend propane gas for
use in the Nordic Region, but butane
can also be used.Butane is not very
suitable for low temperatures.
Fit the regulator and the hose.
Follow the assembly instructions
supplied with the regulator set.
Check the gas hose regularly
for cracks, damage and de-
cay. Never use a damaged gas
hose.
Check that the movable
plastic collar on the regulator
is intact and that it has not
been damaged by hot grill
parts.
Check that the gas bottle
stands on a firm, flat surface
and is lower than the
connector.
Use an approved gas
bottle that fits the regulator
supplied. Bottles of 10/11 kg
or above are recommended.
I3B/P(30): G30(Butane), G31(propane)
and mixture of these, LPG 28-30 mbar
The following gas types can be used
Hose
Gas bottle
Regulator
WARNING
!
Never store the gas bottle
under the grill when in use. If the
gas bottle is being stored under the
grill when not in use, disconnect
the regulator.
!
Never move the grill while
it is in use, or connected
to the gas bottle.
19
