Innehållsförteckning
Florida 4
Leak Testing
ALL JOINTS AND CONNECTIONS MUST NOW BE
LEAK TESTED BEFORE USING THE GRILL.
Leak test annually, and whenever the gas bottle is removed or replaced.
Always perform a leak test in a well-ventilated area.
!
8
If there are still gas leaks after repeated attempts, contact your dealer.
7
IF BUBBLES APPEAR, SWITCH OFF THE GAS SUPPLY AND REPAIR THE
PROBLEM. PERFORM A NEW LEAK TEST. DO NOT USE THE GRILL BEFORE YOU
ARE SURE THAT THERE ARE NO LEAKS.
6
Open the gas tap on the regulator and carefully check for bubbles
appearing anywherethe liquid has been applied.
1
Make a mixed solution
(½ water and ½ liquid detergent / soap).
2
Ensure that there are no naked flames,
heat sources and cigarettes in the vicinity
when performing a leak test.
3
Check that all controls on the grill are in
the ”OFF” position.
4
Set the regulator to the ”OFF” position and connect it
to the gas bottle.
5
Apply the liquid to all joints and connections on the gas bottle,
regulator, the entire hose and all valves on the grill.
!
WARNING!
NEVER USE AN OPEN
FLAME TO PERFORM
A GAS LEAK TEST
18
