![background image](http://html1.mh-extra.com/html/nordforest/capstan-winch-1200/capstan-winch-1200_operating-manual_1701463093.webp)
88
900012 Rev. 01 | 09.2017
Cleaning and maintenance
Capstan winch 1800, 1200, 400
Replacing the
air filter sponge
If the air filter sponge is damaged or worn:
›
Unscrew the air filter cover.
›
To do so use a suitable tool, such as a Phillips screwdriver.
›
Remove the damaged or worn air filter sponge.
›
Insert the new air filter sponge.
›
Retighten the screws.
Pulling rope
Cleaning the pulling rope
›
Clean the pulling rope of wood residues and other dirt after every
use.
›
In case of heavier soiling, clean the pulling rope with clear water or
with rope washing products available from retailers.
›
Do not use corrosive or aggressive cleaning agents.
›
After every use dry the pulling rope in air and stow it loose in a rope
bag.
Replacing the pulling rope
›
Replace a worn, damaged or torn pulling rope promptly.
Spark plug
The spark plug is in the top section of the capstan winch, next to the
air filter cover.
Inspecting the spark plug
Inspect the spark plug at least every 50 operating hours. Be
aware of the electrode spacing. The electrode spacing must be
0.5–0.6 mm.
i