![background image](http://html1.mh-extra.com/html/nordforest/capstan-winch-1200/capstan-winch-1200_operating-manual_1701463094.webp)
89
900012 Rev. 01 | 09.2017
Cleaning and maintenance
Capstan winch 1800, 1200, 400
EN
In order to inspect the spark plug and electrode spacing:
›
Take off the spark plug cap.
›
Unscrew the spark plug.
›
To do so use a suitable tool, such as a spark plug wrench.
If the spark plug is in good condition and the electrode spacing is
correct:
›
Screw the spark plug tight again with the spark plug wrench.
›
Place the spark plug cap back on the spark plug.
If the spark plug is damaged or the electrodes are burned, charred or
encrusted:
›
Replace the spark plug (see “Replacing the spark plug” on
page 89).
Very heavy encrustation of the electrodes can be caused by
incorrect carburettor setting, too much oil in the petrol mixture
or poor quality oil in the petrol mixture.
Replacing the spark plug
Replace the spark plug after 100 operating hours or with heavy
encrustation of the electrodes.
In order to replace the spark plug:
›
Take off the spark plug cap.
›
Unscrew the spark plug.
›
To do so use a suitable tool, such as a spark plug wrench.
›
Replace the spark plug with an original part.
›
Only use spark plugs with the following designations:
Motor type
Name
Article no.
Active motor
MR 80
211103
Kawasaki motor
NGK BPMR8Y
220704
›
Screw the spark plug tight again with the spark plug wrench.
›
Place the spark plug cap back on the spark plug.
i
i