![background image](http://html1.mh-extra.com/html/nordforest/capstan-winch-1200/capstan-winch-1200_operating-manual_1701463084.webp)
79
900012 Rev. 01 | 09.2017
Commissioning and operation
Capstan winch 1800, 1200, 400
EN
›
Switch the choke lever to the “| |” position.
›
Vigorously pull the starter handle multiple times until the motor
starts.
Starting the Kawasaki motor
In order to start the motor:
›
Switch the on/off switch to the “
I
” position.
If the motor is still cold:
›
Set the choke lever to the “closed” position.
If the motor has already been running and is warm, you do not
require the choke function.
›
Press the rubber dome of the primer approx. 1–2 times, to pump the
petrol mixture into the carburettor. As soon as mixture is visible in
the primer stop pumping, otherwise the motor will “flood”.
The petrol mixture is visible in the primer.
›
Pull the starter handle until the motor starts.
›
After starting, gradually move the choke lever to the “open”
position.
If the motor starts briefly and then switches off again:
›
Set the choke lever to the “open” position and pull on the starter
handle again.
i