nord NORDAC SK 5xxE Series, Manual

Page: 38 / 160

NORDAC SK 5xxE Manual
38 Subject to technical alterations BU 0500 GB
Terminal Function
[factory setting]
Data Description / wiring suggestion Parameter
Terminal block X6
(only SK 52x/53xE)
40 GND /0V Reference potential
for digital signals
0V digital
51 ENCA+ Track A
52 ENCA- Track A inverse
53 ENCB+ Track B
54 ENCB- Track B inverse
TTL, RS422
500…8192Imp./Rpm.
The incremental encoder input can be
used for the exact regualtion of speed
of rotation, additional set point
functions or positioning.
An encoder system with 10-30V supply
voltage must be used in order to
compensate for voltage drop in long
cable connections.
Note:
Encoders with 5V supply are not
suitable in order to set up a system
which operates reliably.
P300
…P327
Terminal block X7
(only SK 52x/53xE)
73 RS485 +
74 RS485 -
Data cable RS485
Baudrate
9600…38400Baud
Terminal resistance
R=120
Ω
BUS connection parallel to RS485 on
RJ12 plug
NOTE:
The terminal resistance of DIP
switch 1 (see RJ12/RJ45) can also be
used for Kl. 73/74.
P502
…P513
26 DIN6 digital input 6
[no function]
P425
27 DIN7 digital input 7
[no function]
7.5...30V, R
i
=3.3k
Ω
As described for terminal block X5,
DIN1 to DIN5.
Not suitable for the evaluation of a
motor thermistor.
P470
5 DOUT1 Output 3
[no function]
P450
…P452
7 DOUT2 Output 4
[no function]
digital output
18-30V, each to VI 24V
max. 20mA
max. 100k
Ω
load
For evaluation in a control system. The
scope of functions corresponds to the
relay (P434/441).
P455
…P457
44 VI 24V 24V supply voltage
18…30V
at least 800mA
External voltage supply provided by
customer for the control unit of the
frequency inverter. Is essential for the
function of the frequency inverter.
Internally in parallel with Kl.44 to X5!
40 GND /0V Reference potential
for digital signals
0V digital Reference potential
Terminal block X8
(only SK 52x/53xE)
86 VO_S 24V Supply voltage
87 VO_S 0V Reference potential
18-30V, each to VI 24V
When setting-up without using a safety
function, wire directly to V_IS 24V.
88 VI_S 0V Reference potential
89 VI_S 24V Input
safe pulse block
24V
±
25%, 100mA
Refer to technical data!
Fail-safe input
P420
…P426,
P470