18
4.5.3 Inverted Roll Sensor Mounting
If desired, the Roll sensor may be
mounted inverted, so long as the
connector exits towards the right-hand
boom. Inverted mounting may be used
to optimize the mounting criteria
explained in
Section 4.5
.
Figure 17 – Inverted Roll Sensor Mounting may be Applicable for Optimal Performance
4.5.4 Temperature probe
Fasten the temperature probe (
E03
) to the
UC4+ valve block using the included
3/8x1/2” bolt as illustrated in
Figure 18
.
Figure 18 – UC4+ Valve Block with
Temperature Probe Installed
Summary of Contents for UC4 Plus Rogator 1286C
