13
4.4 M
AIN
L
IFT
S
ENSOR
I
NSTALLATION
1.
Assemble the main lift sensor bracket (
B11
)
as shown in
Figure 10
.
Figure 10 – Main Lift Sensor Bracket
2.
The bracket can then be mounted to the
lowest frame member on the center section of
the sprayer. The bracket should be mounted
so the sensor mounting collar is in
approximately the center of the sprayer and
ahead of the boom (
Figure 11
and
Figure
12)
.
The sensor mounting collar must not
be behind the sprayer’s wheel.
The General Mounting Rules for UC4+
Ultrasonic Sensors, from the previous
section, must be followed.
Figure 11 – Main Lift Sensor Bracket
Mounting Position
3.
Mount the sensor onto the sensor mounting
collar (
Figure 11
).
Figure 12 – Main Lift Sensor Mounted in the
Correct Location
Bracket Tube
Sensor
Mounting Tab
Sensor Mounting
Collar
Bracket Base
Summary of Contents for Gregson Maverick 120 Series
