Nomadix AG 5000, User Manual, Page: 71 / 286

AG 5000
System Administration 67
Establishing Secure Administration {Access Control}
The AG 5000 allows you to block administrator access to interfaces (Telnet, WMI
and FTP) and incorporates a master access control list that checks the source (IP
address) of administrator logins. A login is permitted only to the interfaces that have
not been blocked, and only if a match is made with the master “Source IP” list
contained on the AG 5000. If a match is not made with the “Source IP list,” the login
is denied, even if a correct login name and password are supplied. The access control
list for source IPs supports up to 50 (fifty) entries in the form of a specific IP address
or range of IP addresses.
This procedure allows you to enable the “Access Control” feature and block
administrator access to specific interfaces, and add or remove administrator “Source
IP” addresses.
1.
From the Web Management Interface, click on
Configuration
, then
Access
Control .
The Access Control screen appears:
2.
Enable or disable administrator access to any of the following interfaces:
‹
Telnet
‹
Web Management
‹
FTP
ag5000_userguide.book Page 67 Friday, March 4, 2005 3:05 PM