Nomadix AG 5000, User Manual, Page: 116 / 286

AG 5000
112 System Administration
Your SNMP manager needs this information to enable network management
over the Internet.
4.
When finished, you must reboot the system for the new settings to take effect.
Click on the check box for
Reboot after changes are saved?
to reboot the
system after saving your changes.
5.
Click on the
Submit
button to save your changes and reboot the system, or click
on the
Reset
button if you want to reset all the values to their previous state.
You can now use your SNMP client to manage the AG 5000 via the Internet.
Enabling Dynamic Multiple Subnet Support (Subnets)
Nomadix’ dynamic multiple subnet support allows you to create flexible and cost-
effective IP pool solutions to meet the demands of complex networks in large
residential and public access networks. For example:
‹
Establish a maximum of 15 different DHCP pools for routable IP addresses
at the same time.
‹
Establish a maximum of 10 different public IP subnets that will not be
address-translated by Nomadix' market-leading Dynamic Address
Translation (DAT) feature.
‹
Define the user's subnet via the management interfaces.
1.
From the Web Management Interface, click on
Configuration
, then
Subnets
.
The Public Subnets Settings screen appears:
ag5000_userguide.book Page 112 Friday, March 4, 2005 3:05 PM