Nomadix AG 5000, User Manual, Page: 202 / 286

AG 5000
198 System Administration
Adding Static Ports {Static Port-Mapping Add}
Static Port-Mapping allows the network administrator to setup a port mapping
scheme that forwards packets received on a specific port to a particular static IP
(typically private and mis-configured) and port number on the subscriber side of the
AG 5000. The advantage for the network administrator is that free private IP
addresses can be used to manage devices (such as Access Points) on the subscriber
side of the AG 5000 without setting them up with public IP addresses.
This procedure shows you how to add static ports.
1.
From the Web Management Interface, click on
System
, then
Static Port-
Mapping Add .
The Add Static Port-Mapping Entries screen appears:
2.
Enter the
Internal IP Address
.
Ensure that the device with the Internal IP Address has been added to
the subscriber’s table.
ag5000_userguide.book Page 198 Friday, March 4, 2005 3:05 PM