Nomadix AG 5000, User Manual, Page: 54 / 286

AG 5000
50 Installing the AG 5000
Your new settings are displayed and the AG 5000 reboots. When the system
restarts, the Telnet interface is enabled (based on your new configuration settings
which are saved to the AG 5000’s on-board flash memory).
10.
Go to “Logging Out and Powering Down the System” on page 50 .
Logging Out and Powering Down the System
Use this procedure to log out and power down the AG 5000.
1.
Enter
l
(logout) at the AG 5000 Menu .
Your serial session closes automatically.
S
AMPLE
S
CREEN
R
ESPONSE
AG 5000>l
Serial session 1 closing
2.
Turn off the AG 5000 and disconnect the power cord.
3.
Disconnect the serial cable between the AG 5000 and your computer.
The start up configuration is now complete; however, before connecting
the AG 5000 to the customer’s network, you must power down the
system.
ag5000_userguide.book Page 50 Friday, March 4, 2005 3:05 PM