Nomadix AG 5000, User Manual, Page: 55 / 286

AG 5000
Installing the AG 5000 51
Connecting the AG 5000 to the Customer’s Network
Use this procedure to connect the AG 5000 to the customer’s network (after the start
up configuration parameters have been established).
1.
Choose an appropriate physical location that allows a minimum clearance of 4cm
either side of the unit (for adequate airflow).
2.
Connect the AG 5000 to the router, then connect the AG 5000 to the customer’s
subscriber port.
3.
Connect the power cord and turn on the AG 5000.
4.
Go to “Establishing the Basic Configuration for Subscribers” on page 52 .
To
Network
To
Subscribers
Rear Panel
ag5000_userguide.book Page 51 Friday, March 4, 2005 3:05 PM