Nomadix AG 5000, User Manual, Page: 57 / 286

AG 5000
Installing the AG 5000 53
3.
Follow the on-screen instructions to set up your DHCP options. For example:
S
AMPLE
S
CREEN
R
ESPONSE
Configuration>dh
Enable/Disable IP Upsell [disabled ]:
Enable/Disable DHCP Relay [disabled ]:
Enable/Disable DHCP Server [enabled ]:
Enter external Subnet-based DHCP Service [disabled ]:
IP Upsell Disabled
DHCP Relay Disabled
External DHCP Server IP 0.0.0.0
DHCP Relay Agent IP 0.0.0.0
DHCP Server Enabled
DHCP Server Subnet-based Disabled
Server-IP Server-Netmask Start-IP End-IP Lease Type IPUp
208.11.0.4 255.255.0.0 208.11.0.5 208.11.0.7 20 PRIV NO
10.0.0.4 255.255.255.0 10.0.0.5 10.0.0.250 30 PRIV NO *
* Default IP Pool
DHCP IP Pools Configuration:
0 - Show IP Pools
1 - Add a new IP Pool
2 - Modify an IP Pool
3 - Remove an IP Pool
4 - Exit this menu
Select the DHCP Pool configuration mode [0]:
When assigning a DHCP Relay Agent IP address for the DHCP Relay,
ensure that the IP address you use does not conflict with devices on the
network side of the AG 5000.
Although you cannot enable the DHCP relay and the DHCP service at
the same time, it is possible to “disable” both functions from the
Command Line Interface. In this case, a warning message informs you
that no DHCP services are available to subscribers.
After setting up your DHCP options, the system must be rebooted for
your changes to take effect.
ag5000_userguide.book Page 53 Friday, March 4, 2005 3:05 PM