Nomadix AG 5000, User Manual, Page: 205 / 286

AG 5000
System Administration 201
Blocking a Subscriber Interface {Subscriber Interfaces}
The AG 5000 allows System Administrators to block subscriber interfaces.
1.
From the Web Management Interface, click on
System
, then
Subscriber
Interfaces
.
The Subscriber Interfaces screen appears:
2.
Enable or disable the following items by clicking on the corresponding check
box:
‹
Block Subscriber Interface 1
‹
Block Subscriber Interface 2
3.
Click on the
Submit
button to save your changes, or click on the
Reset
button to
reset all values to their previous state.
Updating the AG 5000 Firmware {Upgrade}
Upgrading the AG 5000 firmware is performed from the AG 5000’s Command Line
Interface (CLI) only. Refer to the Firmware Upgrade Procedure (separate document
available from Nomadix Technical Support).
ag5000_userguide.book Page 201 Friday, March 4, 2005 3:05 PM