13
6
TROUBLE SHOOTING
PROBLEM:
The control uniti is powered but:
- The motor doesn’t work
- You can hear the drome of the motor and it doesn’t work
- The lamp is turn off
- All leds are turn off
SOLUTION:
Check all fuses.
PROBLEM:
The 1,6 A fuse is burnt
SOLUTION:
Check all connections and make sure that are not short-circuits or accessories will
absorbe
a lot of power supply
PROBLEM:
The 8 A fuse burns
SOLUTION:
It is possible that the motor is burnt or damaged
PROBLEM:
The motor stops after a few seconds
SOLUTION:
Reduce the sensitive of the motor (the trimmer is countercloskwise)
PROBLEM:
The control unit doesn’t open
SOLUTION:
Check the red led. They should be turn on. If you use the limit switch, the led indicating the closing limit switch close,
when the gate is closed. The green led should be turned off.
PROBLEM:
The control unit doesn’t work correctly.
SOLUTION:
Make sure that all services and accessories are connected
t
o the right power supply pole.
