START-S11
Technical manual
-27-
1
Go to the function
C04
with
P1, P2
and
P3
2
Press
P1
to confi rm
3
Press the button of the remote control which souhld be cancelled
4
Operation successfully done!
This operation cancell one single code in the memory.
8.4
CANCELLATION of a SINGLE CODE
c 04
P1 conferma
cAnc
9
Changing of the working time and adjustment
As the working time are programmed we try to adjust them.
1
When the gate is closed, give a START command
with a remote control
2
Check if the working time, slowind down
and pause time are correct.
3
Once the gate is closed, it is possible to change the wor-
king time and the set up of group T.
1
2
1
2
1
2
In the next page you can see the parameters of group
T
which can change the working time.
Make this operation also for the
PARTIAL OPENING command.
!
