START-S11
Technical manual
-23-
It is possible to programm the working time separatelly. If limit switches are available or it is programmed the
obstacle detection, the control boards makes automatically a complete cycle.
7.3
Memorization of the
START
times
This operation is possible only when the gate is closes.
If during a memorization of the working times,
will work a security contact, make this operation again.
!
1
Close the gate.
2
Bring to the function
P1
,
P2
and
P3
go to the function
R01.
3
Press button
P1
and the motor 1 starts opening .
4
The displays confi rm
that you are memorizing the working time.
5
Wait until the fi rst leaf is completelly open.
6
Opening time MOT1:
memorized
If the
OLS1
is not installed press
P1
, otherwise if the
OLS1
is
connected don’t do nothing because the limit switch gives a drive
to the memorization.
7
In case the function S10 is activated go to the point no.13 of
the table, otherwise the second leaf opens.
8
Opening time MOT2:
memorized
If the
OLS2
is not installed press
P1
, otherwise if the
OLS2
is
connected don’t do nothing because the limit switch gives a drive
to the memorization.
9
The pause time shold be set up manually with
T11
,
the standard value is 10 sec.
r 01
1
2
2
1
P1
>
1
2
APPt
1
2
P1
>
