Nokia IP390 - Security Appliance, Installation Manual

Page: 82 / 97

7
Troubleshooting
82 IP390 Security Platform Installation Guide
If you issue the printenv command again, the boot-file and boot-device entries are present, as
shown in this example:
BOOTMGR[2]> printenv
Bootmgr Revision: 3.3,base kernel=3.5.1-fcs1
02.12.2001-102644
autoboot: YES
bootwait: 5
boot-file: /image/current/kernel
boot-flags:
boot-device: wd0
Issue the
halt
command to restart your appliance.
BOOTMGR> halt
Troubleshooting Routing Problems
Several useful tools are available to troubleshoot routing problems. The first tool is available
from the Monitor page in Network Voyager, from which you display routing statistics and errors.
You can access this information from the command-line interface using the ICLID (IPSRD
command-line interface daemon) command. An example use of the ICLID command is shown
below.
For information about the ICLID command, see the
Nokia Network Voyager Reference Guide .
For information about how to access Network Voyager and the related reference materials, see
“Using Nokia Network Voyager” on page 33.