Nokia IP390 - Security Appliance, Installation Manual

Page: 40 / 97

4
About IP390 Appliance Network Interface Cards
40 IP390 Security Platform Installation Guide
Figure 12 Gigabit Ethernet Crossover Cable Pin Connections
Two-Port Copper Gigabit Ethernet Network Interface Card
All NICs installed in an IP390 are installed into slots on the appliance. Gigabit Ethernet NICs
can occupy any of the slots or subslots in an appliance that other NICs do not occupy.
Note
Copper Gigabit Ethernet NICs you use in IP390 appliances need to be the Version 2 type, as
indicated on the right end of the NIC faceplate. These NICs are sold by Nokia under the
order code NIF4425.
Copper Gigabit Ethernet NIC Features
The copper Gigabit Ethernet NIC supports the following features:
„
Supports traffic at 10, 100, and 1000 Mbps
„
High bandwidth
„
Half-duplex mode operation up to 100 Mbps
„
Packet tracing for analysis through tcpdump
„
Compliance with IEEE 802.3ab Gigabit Ethernet specification
00020
1
2
3
4
5
6
7
8 1
2
3
4
5
6
7
8