Nokia IP390 - Security Appliance, Installation Manual

Page: 58 / 97

6
Installing and Replacing Components Other than Network Interface Cards
58 IP390 Security Platform Installation Guide
Figure 21 Compact Flash Memory Card Slot
Caution
To protect the appliance and the compact flash memory card from electrostatic
discharge damage, make sure you are properly grounded before you touch these
components. Use a grounding wrist strap and follow the instructions provided with the
wrist strap before you handle the components or open the appliance. If you do not have
a grounding wrist strap, make sure you are properly grounded before you touch any
electronic component.
You must perform an orderly shutdown of the appliance and turn the power off whenever you
remove the chassis tray assembly to service internal components.
Note
Because power to an IP390 appliance is automatically disconnected when the chassis tray
assembly is opened, you do not need to manually disconnect the power for this procedure.
Any servicing of the unit, however, should be completed with the chassis tray assembly fully
removed from the appliance. Power is still active in the chassis body and care should be
taken when working on the power supply or power supply wiring without disconnecting the
power cord.
Caution
You risk damage to the appliance or loss of data if you do not use the following
procedure when you replace the compact flash memory card.
00550
IP390