Nokia IP2255 - Security Appliance, Installation Manual

Page: 47 / 124

Connecting Power and Turning the Power On
Nokia IP2255 Security Platform Installation Guide 47
If you connect the console port to a data communications equipment
(DCE) device, use a straight-through cable.
For cable pin assignments for the console connection, see “Console Port”
on page 26.
2.
Connect the other end of the cable to the VT100 console or to a system
running a terminal-emulation program.
Connecting Power and Turning the Power On
A power switch and a receptacle for the power cord are located on each power
supply on the back of the appliance as shown in
Figure 10 .
00010
1 2 3 4
10/100/1000BaseT
IP2255
10Base-SR X2
10/100 BaseT
10/100 BaseT
10Base-SR X2
A
L
A
L
1 3 5 7
2 4 6 8
1 3 5 7
2 4 6 8
1 3 5 7
2 4 6 8
1 3 5 7
2 4 6 8
L
A
L
A
L
A
L
A
SLOT 3
SLOT 4
SLOT 1
SLOT 2
SLOT 5
CONSOLE AUX PCMCIA RESET
Console port