Nokia IP2255 - Security Appliance, Installation Manual

Page: 102 / 124

7
Installing and Replacing Other Components
102 Nokia IP2255 Security Platform Installation Guide
If slot 3 or slot 4 is unoccupied, remove the blank plate that covers the
slot.
5.
Using the Phillips-head screwdriver, remove the two screws located on
the front panel of the management NIC.
6. Disconnect the NIC from the motherboard by reaching inside slot 4 and
gently, but firmly, pressing directly behind the front panel of the
management NIC toward the front of the security platform.
7. Remove the existing NIC by sliding it out through the front panel of the
security platform.
To Install the replacement NIC
1. Insert the replacement NIC into slot 5 and guide both sides of the NIC
into the metal tracks on either side of the slot.
2. Press the NIC into the slot until it reconnects to the motherboard and is
flush with the front panel of the security platform.
Note
If the management NIC does not slide easily into the slot or if it
extends beyond the front panel, it might not be in the metal guide
tracks. Remove the NIC and reinsert it, making sure you align both
sides of the NIC inside the metal tracks.
3. Install the two screws into the front panel of the NIC.
4.
Reinsert the NICs or blank plates that you removed from slot 3 and slot 4 .
5. Resecure the retaining screws on the front of each NIC.
1 2 3 4
10/100/1000BaseT
00157
Screws