Nokia E90-1 User Manual Download Page 93

Page: 93 / 117

Security

Fixed dialing

Select

Contacts

Options

SIM contacts

Fixed dial contacts

With the fixed dialing service, you can restrict calls from

your device to certain phone numbers. Not all SIM cards

support the fixed dialing service. Contact your service

provider for more information.
When fixed dialing is activated, calls may be possible to

the official emergency number programmed into your

device.
1. To restrict calls from your device, select

Options

New SIM contact

and enter the contact name and

phone number to the list of numbers to which calls

are allowed, or select

Add from Contacts

to copy the

contact from Contacts. To restrict calls by a country

prefix, enter the country prefix in the list of

numbers. All phone numbers to which calls are

allowed must start with this country prefix.

2. Select

Options

Activate fixed dialing

. You need

your PIN2 code to activate and deactivate fixed

dialing or edit your fixed dialing contacts. Contact

your service provider if you do not have the code.

To cancel the service, select

Options

Deactivate

fixed dialing

Tip: To send text messages to the SIM contacts

while the fixed dialing service is active, you

need to add the text message center number

to the fixed dialing list.

Certificate manager

Important: Even if the use of certificates makes

the risks involved in remote connections and software

installation considerably smaller, they must be used

correctly in order to benefit from increased security. The

existence of a certificate does not offer any protection

by itself; the certificate manager must contain correct,

authentic, or trusted certificates for increased security

to be available. Certificates have a restricted lifetime. If

"Expired certificate" or "Certificate not valid yet" is

shown even if the certificate should be valid, check that

the current date and time in your device are correct.
Before changing any certificate settings, you must

make sure that you really trust the owner of the

certificate and that the certificate really belongs to the

listed owner.
Select

Tools

Settings

General

Security

Certificate management

Digital certificates are used to verify the origins of

software but do not guarantee safety. There are three

different types of certificates: authority certificates,

personal certificates, and server certificates. During a

secure connection, a server may send a server

Security

file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml

Page 93

Jan 8, 2007 1:39:30 PM

Summary of Contents for E90-1






















































































































Search results

Summary of Contents for E90-1

Reviews:

Brands by name

Popular brands

Nokia E90-1, User Manual

Search results

Summary of Contents for E90-1

Reviews:

Brands by name

Popular brands