message from your service provider. This might reduce
the number of settings you need to enter yourself.
The available options may vary. Some or all access
points may be preset for your device by your service
provider. You may not be able to add, edit, or delete
access points. Contact your service provider and e-mail
service provider for more information on access points
and their settings.
Set up an internet access point for
data calls
1. Select
>
Tools
>
Settings
>
Connection
>
Access points
.
2. Select
Options
>
New access point
. To use an
existing access point as a basis for the new one,
select
Use existing settings
. To start with an empty
access point, select
Use default settings
.
3. Define the following settings.
•
Connection name
— Enter a descriptive name for
the connection.
•
Data bearer
— Select
Data call
or
High speed
(GSM)
.
•
Dial-up number
— Enter the modem telephone
number of the access point. Use + before
international numbers.
•
User name
— Enter your user name if required
by the service provider. User names are often
case-sensitive and provided by your service
provider.
•
Prompt password
— Select
Yes
to enter your
password each time you log into a server or
No
to save the password in your device memory and
automate the login.
•
Password
— Enter your password if required by
the service provider. The password is often case-
sensitive and provided by the service provider.
•
Authentication
— Select
Secure
to send your
password always encrypted or
Normal
to send
your password encrypted when possible.
•
Homepage
— Enter the web address of the page
you want to display as the home page when you
use this access point.
•
Data call type
— Select
Analog
,
ISDN v.110
, or
ISDN v.120
.
•
Maximum data speed
— Select the limit to apply
to the transfer speed. If you select
Automatic
, the
data transfer rate is determined by the network
and may be affected by network traffic. Some
service providers may charge more for higher
data rates.
4. After defining the basic settings, select
Options
>
Advanced settings
to define the advanced settings
or
Back
to save the settings and exit.
Set up an internet access point for
packet data (GPRS)
1. Select
>
Tools
>
Settings
>
Connection
>
Access points
.
2. Select
Options
>
New access point
. To use an
existing access point as a basis for the new one,
select
Use existing settings
. To start with an empty
access point, select
Use default settings
.
3. Define the following settings.
61
Con
nectivity
file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml
Page 61
Jan 8, 2007 1:39:30 PM
file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml
Page 61
Jan 8, 2007 1:39:30 PM
