RH-53/54
Nokia Customer Care
6-Disassembly and Assembly Instructions
8
COMPANY CONFIDENTIAL
Issue 2 06/2005
Copyright © 2005 Nokia. All Rights Reserved.
13.) …and the B-Cover Upper Block can be removed.
Consider if the malfunction caused by Upper or
Lower Block. Only open the Coax Connector and
remove the Coax Cable on the defective Block of the
unit.
(For e.g. LCD / Vibra / IHF Speaker fault -> start dis-
assemble upper part, Microphone / Keymat / Charger
fault -> start disassemble lower part)
14.) Placement of the Coax Cable in the Lower Block.
15.) Placement of the Coax Cable in the Hinge.
16.) Placement of the Coax Cable in the Upper Block.
17.) Placement of the Coax Cable in the IHF Antenna
Chamber.
18.) Open the Coax Connector of the Engine Module
carefully by using tweezers.
19.) Note the exactly position when laying the Coax
Cable during assembly.
