background image

EMUL–IP2K–PC User Guide

Edition 1, July 2001, © Nohau Corporation

1

  Overview of the EMUL–IP2K–PC

Emulator System

Hardware

The basic hardware for the EMUL–IP2K debugger system is the EMUL–IP2K–PC/USB–JTAG. At
present, Seehau IP2K supports the IP2022 chip.

Refer to Chapter 2, “Installing the Hardware” for detailed hardware information.

Software

Note

Because there is only one pod selection, the 

Connect

 tab in the Emulator Configura-

tion window is informational only. The 

Hdw Config

 tab offers options you can

select or clear. However, when you load your program a dynamic change to the

selected items can occur if programmed with these selections.

The debugger is configured and operated by the Seehau IP2K user interface. Seehau is a high-level
language user interface that allows you to perform many useful tasks, for example:

 

Loading Flash RAM, running, and stopping programs based on the open source GNUpro C-
compiler and linker platform (not supplied by Nohau Corporation). The GNUPro tools and docu-
mentation for programming the IP2022 processor are available from Red Hat. This special version
of the assembler outputs in ELF format specifically for the Nohau debugger. Contact Nohau Tech-
nical Support if you have questions.

 

Modifying and viewing memory contents including general-purpose registers.

 

Setting one hardware breakpoint and multiple software breakpoints that can be placed in RAM or
Flash.

Summary of Contents for EMUL-IP2K-PC





































Reviews: