Nohau EMUL-IP2K-PC, User Manual, Page: 28 / 36

EMUL–IP2K–PC User Guide
Edition 1, July 2001, © Nohau Corporation
21
Running Program Examples
Nohau provides three program examples:
•
Assembly Test (C:\Nohau\SeehauIP2K\Examples\Asm\Stackdump.exe
•
C Test (C:\Nohau\SeehauIP2K\Examples\C\Cproject\Debug.exe)
•
C Timer Test (C:\Nohau\SeehauIP2K\Examples\C\Timer\Timer.exe)
Note
The C programs are missing the jump instruction at address 0xFFF0! Using the
register window, manually set the PC to zero before stepping into the C programs.
Once you have done this, step into the C source code by pressing the Source Step
Into button on the Seehau Speedbar.
Start Seehau by following the instructions in the “Starting Seehau” section in Chapter 4. Then do the
following to run the test program:
1. Resize the windows on your screen, but do not add the Watch window.
2. From the
File
menu select
Load Code
. The
Open
dialog box opens (Figure 8). Select one of the
program example files for your controller.
Figure 8. Open Dialog Box Displaying the Program Example Directories