Noblelift AWPS23.56, Operation And Safety Manual

Page: 6 / 100

6
1.2 PRE-OPERATION
Operator Training and Knowledge
• The Operators and Safety Manual must be read in its entirety before operating
the machine.
• An operator must not accept operating responsibilities until adequate training has
been given by competent and authorized persons.
• Allow only those authorized and qualified personnel to operate the machine who
have demonstrated that they understand the safe and proper operation and
maintenance of the unit.
• Read, understand, and obey all DANGERS, WARNINGS, CAUTIONS, and
operating instructions on the machine and in this manual.
• Ensure that the machine is to be used in a manner which is within the scope of its
intended application as determined by NOBLIFT
• All operating personnel must be familiar with the emergency controls and
emergency operation of the machine as specified in this manual.
• Read, understand, and obey all applicable employer, local, and governmental
regulations as they pertain to your utilization and application of the machine.
Workplace Inspection
• Precautions to avoid all hazards in the work area must be taken by the user
before operation of the machine.
• Do not operate or raise the platform from a position on trucks, trailers, railway
cars, floating vessels, scaffolds or other equipment unless the application is
approved in writing by NOBLIFT.
• Before operation, check work area for overhead hazards such as electric lines,
bridge cranes, and other potential overhead obstructions.
• Check floor surfaces for holes, bumps, drop-offs, obstructions, debris, concealed
holes, and other potential hazards.