Noblelift AWPS23.56, Operation And Safety Manual, Page: 25 / 100

25
Figure 3-3. AWPS4679/AWPS4696 Platform Control Station
1
、
Emergency Stop Switch - A two-position, red, mushroom-shaped emergency
stop switch functions to provide power to the platform control station and also to
turn off power to the platform function controls in the event of an emergency.
With the Power selector switch positioned to platform, power is turned on by
pulling the switch out (on), and is turned off by pushing the switch in (off).
2
、
Control Pole - it used to control three function
：
lift
、
steer
、
drive. After selecting
one of the function
，
control this switch to use the machine.
3
、
Lift/Drive Select - This toggle switch is used to select either drive or lift.
4
、
LED-indicator light -when the machine was something wrong
，
this light will
twinkle
5
、
Meter Display - to display a series of state in present of machine.
6
、
Horn - This push-button switch, when activated, permits the operator to warn
jobsite personnel when the machine is operating in the area.
7
、
LED-indicator light -when the machine was something wrong
，
this light will
twinkle
IF THE TILT INDICATOR WARNING LIGHT OR HORN IS ON WHEN
PLATFORM IS RAISED, LOWER PLATFORM COMPLETELY, THEN
REPOSITION MACHINE SO THAT IT IS LEVEL BEFORE RAISING