Noblelift AWPS23.56, Operation And Safety Manual, Page: 27 / 100

27
2. Horn - This push-button switch, when activated, permits the operator to warn
jobsite personnel when the machine is operating in the area.
3.Turtle speed / rabbit speed selection switch - the toggle switch for selecting
turtle speed forward and backward or forward and backward rabbit speed, choose
a function, the switch must be moved to the correct direction to start the function.
4.Meter Display - to display a series of state in present of machine.
5. Control Pole - it used to control three function
：
lift
、
steer
、
drive. After selecting
one of the function
，
control this switch to use the machine.
6. Emergency Stop Switch - A two-position, red, mushroom-shaped emergency
stop switch functions to provide power to the platform control station and also to
turn off power to the platform function controls in the event of an emergency.
With the Power selector switch positioned to platform, power is turned on by
pulling the switch out (on), and is turned off by pushing the switch in (off).
3.5 SIGNS
Figure 3-4 ID-plate
1 this product allows a maximum wind speed 2 this product model
3 this product rated load 4 the product is rated occupant number
5 this product is rated equipment quality 6 this product allows a maximum hand
operating force 7 the product serial number
8 this product allows the maximum lateral inclination
9 this product allows the maximum slope
10 the product serial number11of the weight of the total product