Noblelift AWPS23.56, Operation And Safety Manual

Page: 48 / 100

48
Lube - White Lithium Grease
Interval - Every 6 months
1. With the platform empty, elevate machine and swing safety prop out of it’s
stowed position.
ENSURE THE SCISSOR ARMS ARE PROPERLY SUPPORTED.
2. Locate the Lower and Upper Slide Pads and remove all dirt and debris from the
slide channel area (1, 2). Refer to Figure 6-2., Lower Slide Pad Channel.
3. Apply a layer of grease along the inside and bottom of the lower slide channel (1)
on both sides of the machine.
Figure 6-2. Lower Slide Pad Channel Figure 6-3. Upper Slide Pad Channel
4. Apply a layer of grease along the inside and top of the upper slide channel (2)
on both sides of the machine. Refer to Figure 6-3., Upper Slide Pad Channel.
NOTE: Recommended lubricating intervals are based on machine operations
under normal conditions. For machines used in multi-shift operations
and/or exposed to hostile environments or conditions, lubrication
frequencies must be increased accordingly.
6.5 TIRES AND WHEELS
Tire Wear and Damage
Inspect tires periodically for wear or damage. Tires with worn edges or distorted
profiles require replacement. Tires with significant damage in the tread area or
side wall, require immediate evaluation before placing the machine into service.
Wheel and Tire Replacement
Replacement wheels must have the same diameter and profile as the original.
Replacement tires must be the same size and rating as the tire being replaced.
Wheel Installation