Noblelift AWPS23.56, Operation And Safety Manual

Page: 15 / 100

15
3. Rules of the employer and government regulations.
4. Use of approved fall protection device.
5. Enough knowledge of the mechanical operation of the machine to recognize a
malfunction or potential malfunction.
6. The safest means to operate the machine where overhead obstructions, other
moving equipment, and obstacles, depressions, holes, drop-offs.
7. Means to avoid the hazards of unprotected electrical conductors.
8. Specific job requirements or machine application.
Training Supervision
Training must be done under the supervision of a qualified person in an open area
free of obstructions until the trainee has developed the ability to safely control and
operate the machine.
Operator Responsibility
The operator must be instructed that he/she has the responsibility and authority to
shut down the machine in case of a malfunction or other unsafe condition of either
the machine or the job site.
2.2 PREPARATION, INSPECTION, AND MAINTENANCE
The following table covers the periodic machine inspections and maintenance
recommended by NOBLIFT Industries, Inc.. Consult local regulations for further
requirements for aerial work platforms. The frequency of inspections and
maintenance must be increased as necessary when the machine is used in a
harsh or hostile environment, if the machine is used with increased frequency,
or if the machine is used in a severe manner.
NOBLIFT INDUSTRIES, INC. RECOGNIZES A FACTORY-CERTIFIED
SERVICE TECHNICIAN AS A PERSON WHO HAS SUCCESSFULLY
COMPLETED THE NOBLIFT SERVICE TRAINING SCHOOL FOR THE
SPECIFIC NOBLIFT PRODUCT MODEL.