manualshive.com logo in svg

noax N11, User Manual

Share
Download
noax N11 User Manual Download Page 52

User Manual N11
Connectors and interfaces

Industrial PC

www.noax.com

Page 52 of 120

3085-US-2.4

9.10

Front USB port / Side USB port

The nSMART™ software can be used to activate or deactivate the Front USB port / Side
USB port. When the port is deactivated, it is completely disconnected from the supply
voltage.

The Front USB port / Side USB port is activated as factory default setting.

The installed rubber cover and an additional internal seal prevent the ingress of liquids.

Caution

When not in use, seal the Front USB port / Side USB port with the rubber cover.

Spare rubber covers can be ordered via the noax hotline.

9.10.1 Front USB port

Available at enclosure types C12, C15, C19 and C21W

1

Front USB port

9.10.2 Side USB port

Available at enclosure types C12P and C15P

The Side USB port is located on the right side area of the enclose front.

1

Front USB port

1

1

Summary of Contents for N11

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands