User Manual N11
General safety instructions
Industrial PC
www.noax.com
Page 12 of 120
3085-US-2.4
4
General safety instructions
When using products which come into contact with electrical voltages, the valid VDE/
IEC/EN regulations must be observed.
Warning
Repairs on the Industrial PC should only be carried out by authorized specialist person
nel.
Warning
Never repair the device yourself. Always contact the noax hotline instead and send in
your device to be repaired if necessary.
The device information required when you contact the hotline can be found on the
Industrial PC rating plate.
Important information about the features of your device is
documented here. Please always give the technician the full type code and serial
number (for rating plate see Chapter 5.1.1 or 5.1.2 / for device information from nS
MART™ see Chapter 11.4).
4.1
Documentation
D
To avoid injury and damage, it is important to read and observe the following usage
and safety information before initial operation.
D
The manufacturer/supplier accepts no liability for any damage that occurs as a
result of failing to comply with these instructions.
D
Keep this documentation and make sure to include it when passing on the device.
4.2
Handling the device
D
Respect the weight of the devices when handling them (e.g., transportation,
installation).
D
Only use the device if it is in perfect condition. Replace defective devices immedi
ately, especially when:
-
The power cable or power socket is damaged.
-
Liquid has entered the device.
-
The device no longer works as described in the documentation.
-
The housing is damaged.
D
Check that the values specified on the rating plate correspond to the electrical
ratings for your power supply.
D
IP protection class:
Make sure that liquids and aggressive vapors (e.g., from cleaning agents) are not
able to enter areas without an IP protection class, such as the connector area.
D
Batteries:
Only use batteries of the same type or those of equivalent types recommended by
the manufacturer.
Follow the instructions provided in Chapter 16 on “Disposal”.
