manualshive.com logo in svg

noax N11, User Manual

Share
Download
noax N11 User Manual Download Page 33

User Manual N11

Installation

Industrial PC

3085-US-2.4

www.noax.com

Page 33 of 120

8.6

Industrial PC Compact - C15, C15P, C19, C21W

Various device and wall brackets which can be attached to the rear T‐slots are available
as options for this housing types. The variable height adjustment (slot) and the design
of the brackets offer a wide variety of installation options in different positions.

Warning

Make sure that the device brackets are attached stable and secure.

8.6.1

Industrial PC Compact - C15

Fig.  13: Rear panel C15 (all dimensions in mm)

VESA 200 x 100 mounting option with M6 thread (depth 7.5 mm / 0.3 inches)

VESA 100 mounting option with M6 thread (depth 7.5 mm / 0.3 inches)

2x T‐slot as per DIN 508

Fig.  14: Side view C15 (all dimensions in mm)

Side mounting option for accessories – M6 thread (depth 10.0mm / 0.39 inches)

1

2

3

4

Summary of Contents for N11

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands