products with halogen lamps; on products with Metal Halide
lamps, the lamp continues to run and is blacked out by a shutter.
Short-cut:
to change the colour and gobo of all selected
lanterns, select the new colour and gobo and touch the run pad.
Use with various lanterns
• Predator HX/MX
all features are available
• IQ500
Split colours and colour scrolling are not available
•
Microbeam, IQ250
Gobo pads have no effect (except for blackout and strobe)
• Datamoon.
Joystick x-axis controls dish rotation, y-axis has no effect. Split
colours and colour scrolling are not available. Gobo pads have no
effect (except for blackout and strobe)
• Chroma HX / Chroma 50
Joystick x-axis has no effect, y-axis controls dimming. Some
split colours and colour scrolling are available, but gobo pads have
no effect (except blackout and strobe)
The IQ-MX80 is not compatible with the Chroma 250.
• Raptor
Joystick x-axis controls barrel rotation, y-axis controls barrel
left-right movement. Split colours are available.
• Quasar
Joystick x-axis controls dish rotation, y-axis controls dish left-
right movement. Split colours are available.
• SB500 Super Blitzer
Joystick x-axis controls dish rotation, y-axis controls dimming.
Colours and gobos have no effect (except blackout and strobe)
Running programs.
Switch off manual mode by touching the
MAN.
pad.
The display will now show the program number and the step
number in the program. Select the program number by touching
the
PROG
pad. Programs 1 to 10 are factory written programs
and cannot be overwritten. Programs 11 to 20 are user-writable
programs, and can be overwritten at any time if the write enable
© N.J.D. Electronics 1997
-Page 6-
User Guide
IQ-MX80
