Instruction Manual
NivuFlow 650
page 144
NF 650 - rev. 01 / 29.06.2020
42.1 Analog Inputs
This menu can be used to indicate the current values on the transmitter inputs as well as the
readings assigned to this value by using the measurement span.
Fig. 42-2
Indication of analog input values
42.2 Analog Outputs
This menu can be used to indicate the calculated current values to be output through the
analog converter as well as the readings assigned to these values by using the measurement
span.
Moreover it is possible to simulate (password protected) the particular analog values.
Fig. 42-3
Indication of analog output values
Note
Only the signal available on the analog output converter is shown here. The currents actu-
ally flowing cannot be output.
This menu cannot be used to detect and to indicate external faulty wiring.
