Instruction Manual
NivuFlow 650
page 124
NF 650 - rev. 01 / 29.06.2020
34.5.6 Parameter reset
The parameter reset will reset any parameters to default settings. Counters, changed pass-
word and saved measurement data are retained.
The actual parameter reset is not executed before you exit the parameter settings menu (back
to main menu) and the storage is confirmed. The process can be aborted up to this action.
Fig. 34-12 Resetting the parameters to default settings
34.5.7 Update NivuFlow
Upload a NivuFlow firmware stored on USB.
Accessible in Service Level.
Only in consultation with the companies of the NIVUS Group.
34.5.8 Update h-Sensor
Upload a sensor firmware stored on USB.
Accessible in Service Level.
Only in consultation with the companies of the NIVUS Group.
It is possible to update either all sensors together or only one sensor individually.
Fig. 34-13 Update h-Sensor
