Main Display
page 133
NF 650 - rev. 01 / 29.06.2020
3
Date/Time
4
Display range 1 (Output field 1 for flow rate)
5
Display range 2 (Output field 2...5 for level, average flow velocity, medium temperature
and total)
6
Automatic scaling for display range 3
7
Display range 3 (trend graph on level, velocity, medium temperature and amount)
8
Operating display for the assignment of the function keys
9
Display range 4 (Output field 6 for flow rate of combined measurement place - Combi)
10 Display range 5 (Output field 7...9 for the flow rates for measurement point 1 and measu-
rement point 2 and for the sum from the combined measurement points)
Fig. 38-1
Main screen overview
The
main display
for types T4 and TM (with several measurement points)
switches
back
and forth between the active measurement points, provided that switching is activated under
>Advance main display< (see Sect. “36 Display Parameter Menu”). Clicking on the display
fields stops the display switching.
You can scroll between the individual measurement points
manually
using the
Tab key
.
The menu allows
direct access
to the most relevant settings and information:
Â
Ü
Rotate the rotary pushbutton until the desired section is highlighted in black.
Â
Ü
Press the rotary pushbutton - the relevant section will open a dialogue window.
As soon as the display fields are selected (shown in black), the numbers 1...3 are displayed in
the upper right-hand corner instead of date and time for the types T4 and TM:
1 - measurement place 1
2 - measurement place 2
3 - measurement place Combi
Fig. 38-2
Flow volume section selected (figure on the right side: types T4/TM)
Note
After having modified the system-specific parameters, you need to confirm that the modifi-
cations are saved to activate the modified parameters.
