•
Possible damage caused by incorrect, improper use or unqualified repair works
will not be subject to liability. In these cases warranty claims become void.
• Please use the integrated coffee grinder for roasted and untreated beans only,
never for other foodstuffs! Please make sure there are no foreign substances
among the coffee beans - failing this warranty claims will become void.
• If repair services are required, including replacement of the power cord, please
first contact your dealer or the service-hotline. Afterwards send the machine
to
the dealer from whom it was purchased – or to NIVONA national customer
services.
• If the appliance’s power cable is damaged, it must be replaced by the manufac-
turer, its customer service or a similarly qualified person to avoid danger.
Attention: Repairs to electrical appliances must only be undertaken by a pro-
fessional! Improper repairs may result in severe danger for the user! Should
the appliance be used or maintained improperly or incorrect, the warranty
shall become void!
Attention: Using the on/off switch (fig.1/J) during the brewing process may
damage the appliance! Turn the appliance off only after it has finished the
job.
Attention: Risk of burning! When drawing steam or hot water, a shot of hot
water may spray from the coffee spout. Allow the spout to cool down before
you touch it.
2. Initial start-up
2.1. Getting started
➔
Unpack the appliance and all items belonging to it with care.
The following are included in the package contents:
•
User Manual
•
Warranty card
•
Measuring spoon with assembly instruction for filter insert
•
Two cleaning tabs
•
One Claris filter
•
One testing strip for water hardness
Note: In case of customer service being required, the appliance should be shipped in its original pack-
aging. Please keep this safe, including the polystyrene parts.
➔
Place the appliance on a flat, dry and suitable surface.
➔
Plug the power cord into a professionally installed mains socket.
➔
Your appliance has a power cord bay – if the cable is too long, place the excessive length in the
power cord bay at the back (fig. 1/T)
68
GB
1. Safety information / 2. Initial start-up
04_Niv_859_BDA_sw_GB_03.indd 68
13.04.17 15:42
